FAQs

Technical Questions and Answers
For general enquiries please use the Direct Response Form located on our Contact Us page. Examples of questions we have received are:

Do you inspect and test for compliance with BS7671 or the Electricity at Work Regulations?
As a company we inspect and test electrical installations for compliance with the safety and legal requirement of the Electricity at Work regulations 1989, which is statutory law within the United Kingdom.
To achieve this compliance we utilise our engineering skills and experience in combination with comprehensive industry guidance.

I need an accurate data collection for my street lighting installation. With up to 64 data items for each item of equipment are you able to offer a reliable and accurate service?
YES, we are used to doing this highly specialised work and are able to capture data electronically using our in-house application software. Validation of data is carried out at point of collection utilising over 100 rules for data item mix and energy allocations. GPS and GIS is mapped on site electronically.

There are so many service providers for analysis of the structural condition of street lighting installations, why should I chose you?
Over the past 10 years we have inspected and tested over a quarter of a million street lighting columns and posts. As engineers we were never satisfied with the instrumentation available for the testing and life prediction. With our in depth knowledge of the oil industry we developed their 'eddy current' techniques into a device which fulfills the need for a low cost, accurate and repeatable testing regime specifically for street lighting, the Patented dipstik^®.

With over 35 years of experience do you have a typical specification we could adopt for our installation?
We have a statement within our company's Code of Practice that outlines all of the items you will need to include within a specification to suit your installation.

 We have a PCB problem. Can you help?
Yes. Within our company's Code of Practice we have a procedure for the identification and removal of PCBs. We are also a licensed carrier.

Does you company have a dress code?
Our company has a Code of Conduct and a Dress Code appropriate for all locations all Inspectors carry Identity and competance badges ...