Training Services (City and Guilds, Lantra, ASLEC)
City & Guilds Approved Training Centre
During the 40 year career of the Company, training has been an ongoing and vital ingrediant of its success.
We are proud to be a City and Guilds Approved training centre and offer a range of electrical and highway related course.
Electrical courses
2382 -10: Certificate in the Requirements for Electrical Installations (BS 7671: January 2008)
If you are a practising electrician with relevant experience then this qualification is for you. It has been compiled to ensure that you comply with the format, content and applications for Electrical Installations (BS 7671: June 2008).
The following areas are covered:
- Protection for safety
- Selection and erection of equipment
- Inspection and testing to meet the standards of the IEE Wiring Regulations.
2392: Certificate in Fundamental Inspection, Testing and Initial Verification
This qualification has been developed in association with the electrical installation industry, and will satisfy the underpinning knowledge requirements for those involved in the initial verification of electrical installations.
The 2392 Certificate in Fundamental Inspection, Testing and Initial Verification is aimed at practising electricians who have not carried out inspection and testing since qualifying or who require some update training before going on to achieve the 2391-10.
2391-10: Inspection, Testing, Design and Certification of Electrical Installations
Previously known as the qualification 2391-01. If you want to inspect and test electrical installations, then this qualification is right for you. This qualification has been developed to satisfy the requirements for Proposed Qualified Supervisors (PQSs) for various scheme operatives.
2377: Code of Practice for In-service Inspection and Testing of Electrical Equipment
If you need to be familiar with the Institution of Electrical Engineers Code of Practice for in-service inspection and testing of electrical equipment then this qualification can help. There are two certificates: one for managers and one for those who carry out the testing.
New roads and streetworks
6156: Streetworks Excavation and Reinstatement (Certificate for Operatives and Certificate for Supervisors)
If you already have some experience of the job, our Certificate in Streetworks Excavations and Reinstatement for Operatives recognises your skills and knowledge. You need to take one unit on health and safety and can then choose from a range of other units coveriung areas such as:
- Signing, lighting and guarding work
- Digging up the highway
- Laying concrete slabs.
If you are a site supervisor, or you want to be one, then our Certificate for Supervisors is the best qualification for you. You can choose from a range of units that cover everything you need to know about monitoring the work taking place on a streetworks site.
Once you have passed you will be automatically registered with the Streetworks Qualification Register and will receive an identity card proving your new status and enabling you to work legally on the highways.
HEA & Lantra Approved Training Centre
The Highway Electrical Academy, in partnership with Lantra Awards, has agreed a system for Approving Training Organisations and Trainers. This is to ensure the competency of trainers and to provide confidence to employers.
We are proud to be an Highway Electrical Academy & Lantra Approved training centre and offer the following range of electrical and highway related course:
| Course Ref No | Title |
| 101 | Health and Safety at Work Induction |
| 102 | Control of substances hazardous to health |
| 103 | Electrical Safety |
| 104 | Manual Handling |
| 105 | Interpretation of Legislation & Standards |
| 106 | Emergency Arrangements |
| 201 | Hazards and Risk Assessment |
| 203* | Appreciation of Public Lighting and T/Sign Equipment |
| 204 | Power Tools including hand tools (awareness) |
| 207 | Effective Personal Protective Equipment |
| 209 | On Site Safety |
| 202 | Avoiding Danger from Underground Services (training designed to meet the assessment requirements of NRSWA Unit 1) |
| 204 | Power Tools including hand tools |
| 205.1 | Work at height with steps and ladders |
| 208 | Loading, Transporting and Removing Goods (Vehicular) |
| 210 | Work in the vicinity of DNO equipment - G39/1 |
| 214 | Safe Isolation Procedures |
| 301.1 | Excavate (training designed to meet the assessment requirements of NRSWA Unit 3) |
| 301.2 | Minor excavation and temporary reinstatement in the highway for column holes. |
| 301.3 | Reinstatement and compaction (training designed to meet the assessment requirements of NRSWA Unit 4) |
| 301.4 | Reinstatement of sub-base and base (leading to assessment to NRSWA Unit 5) |
| 301.5 | Reinstatement of cold lay bit-mat (training designed to meet the assessment requirements of NRSWA Unit 6) |
| 301.6 | Reinstatement of hot lay bit-mat (training designed to meet the assessment requirements of NRSWA Unit 7) |
| 301.7 | Reinstatement of concrete slabs (training designed to meet the assessment requirements of NRSWA Unit 8) |
| 301.8 | Reinstatement of modular and concrete (training designed to meet the assessment requirements of NRSWA Unit 9) |
| 302 | Signing, Lighting & Guarding / Temporary Traffic Management to meet the requirements of SS 12D (training designed to meet part of the assessment requirements of NRSWA Unit 2) |
| 310 | Monitoring Signing, Lighting & Guarding (training designed to meet the assessment requirements of NRWSA Unit 10) |
| 311 | Monitoring Excavation in the Highway (training designed to meet the assessment requirements of NRWSA Unit 11) |
| 312 | Monitoring Reinstatement and Compaction of Backfill Materials (training designed to meet the assessment requirements of NRWSA Unit 12) |
| 313 | Monitoring Reinstatement of sub-base and top layer materials(training designed to meet the assessment requirements of NRWSA Unit 13) |
| 314 / M314 | Monitoring reinstatement in bituminous material (training designed to meet the assessment requirements of NRWSA Unit 14) |
| 315 / M315 | Monitoring reinstatement in concrete slabs(training designed to meet the assessment requirements of NRWSA Unit 15) |
| 316 / M316 | Monitoring reinstatement in modular and concrete surfaces(training designed to meet the assessment requirements of NRWSA Unit 16) |
| 401 | Electrical Theory |
| 402 | Electricity at Work Regulations |
| 403 | BS7671 / IEE Wiring Regs |
| 801 | Supervise teams on site |
| 802 | Set teams to work & supervise Quality, Safety & Productivity |
| 805 | CDM Awareness |
| 507 | Installation of wiring and control gear |
| 510 | Terminate and connect U/G cable into cut out |
| 511 | Joint underground cables |
| 608 | Operate raising and lowering columns |
| 214 | Safe Isolation Procedures |
| 604 | Visual Inspection-Optical, Structural & Electrical |
| 214 | Safe Isolation Procedures |
| 404 | Familiarisation of circuits used in public lighting |
| 604 | Visual Inspection-Optical, Structural & Electrical |
| 606 | Identify and replace faulty components |
| 701 | Diagnose fault & replace faulty component |
| 703 | Test and inspect new installations |
| 704 | Periodic testing and inspection |
| 705 | Locate faults on underground cables |
| 706 | Periodic structural testing |
| 710 | Awareness of inspection & testing for witnessing |
| 711 | Inspection & Testing Data Collection |
| TSC003 | Repair Faulty Cable |
For more information and pricing information please contact us either by email: mail@electricaltesting.co.uk or on +441493 751859 and ask for James Hill
     |
© Content Inc. 1997 - 2008. All rights reserved Your use of this website signifies your explicit acceptance of our terms and conditions Please view our privacy statement |